Features
Heated Jacket Liner: (see glove liners below)
New Design: 2-in-1 power levels in one liner. Disconnect plugs to select either 105W or 65W watts of infrared deep penetrating evenly-distributed max. heat power (at 13.8V).
-
Instant deep heating using our ActiVHeat Integral Glove internal wiring system to use the single or dual heat controller without rewiring the jacket liner.
-
Designed to be plugged into a 12-13.8V DC power source or 12V battery pack via industry-standard 5.5mm2 x 2.5mm2 x 10mm2 connectors.
-
Controllers options provide multiple ways to control the heat output in your heated gear.
-
Convenient 12 inch chest stowage pocket with integrated phone holder.
-
Stuffs into itself and transforms into an integrated zippered stuff sack to allows for storage on the vehicle.
-
Stretch side and back panels provide comfort and simple standard sizing.
-
Ultra thin design provides comfort and small storage.
-
Comfortable heated fleece collar wicks away moisture.
-
Narrow elastic sleeve cuff reduces bulk around wrists under your outer jacket.
-
Glove connectors are located in zippered pockets at the ends of the sleeves. Can be connected at the cuff to our MOTO 12 heated glove product.
-
Easy care - hand wash and line dry.
Jacket and Glove liners are energized by ActiVHeat carbon fibers bundles that emit far-infrared light waves to generate deep radiant heat that works on radiated heat than mere conduction as with metal-based heated garments.
Where does the Jacket liner heat?: Using our ActiVHeat far infrared generating carbon fiber bundle technology, these thin jacket liners provide full strength penetrating heat front, back, sleeves and collar of the jacket.
Heated Glove Liners
These are the
warmest
gloves on the market today - capable of putting out 14 watts
of infrared deep penetrating heat per glove or 28 watts per pair
- cold
hands are just a memory.
Safety Note:
These glove liners get very hot at full power and must be used with a heat level
controller.
Design
- A true undergarment/base layer — thin spandex based
construction that conforms to your hand shape and allows the glove
liners to be worn beneath most outer gloves. These light, form-fitting
flexible liners also have built in moisture management that pulls moisture from
hands keeping them dry when you sweat.
- Glove liners are
energized by ActiVHeat carbon fibers bundles that emit far-infrared light waves
to generate deep radiant heat that works on radiated heat than mere
conduction as with metal-based heated garments.
Where do the glove liners heat?: Using our
patented far infrared generating carbon fiber bundle
technology, these ultra thin liners provide pleasing penetrating 14.1watts of far infrared heat
per hand around
the sides of all the fingers and thumb as well as over the back of the
hand.
- Hook and
loop closure on wrist is non-binding and reduces bulk when combined with other
gear and the integrated 5.5mm x 2.5mm x 10mm coax barrel socket connects at the cuff to our jacket liner and is compact enough to be stored in
even the smallest of compartments such as the 12 inch chest pocket in the jacket liner.
- Easy care -
hand wash and line dry.
- Machine-washable brushed stretch
polyester allows for maximum form fit.
Sizing Guides
For Jacket Liners - use larger of Chest/Waist, Hips measurements and Sleeve Length measurement for sizing.
Chest/ Waist/ Hips: Measure just under arms and across the shoulder blades, holding the tape firm and level. Waist: use your natural waistline measurement. Use the larger of your chest, waist or hips measurement.
Sleeve Length: As shown in the diagram right, with arm relaxed at your side and slightly bent, measure from center back neck, over point of shoulder, down the outside of the arm to the wrist. If between sizes, order next larger size.
How to use the charts below?
The charts shows body dimensions so you should select a size that has larger dimensions than your body. Body measurement dimensions are in inches.
For example, if you measure 43” around the waist you should buy an XX-LARGE size as the LARGE would be too tight. Please note these are BODY size charts not GARMENT size charts.
(Note: These sizes only apply to ActiVHeat MOTO12 powersport heated garments. ActiVHeat battery powered portable garments will be different sizing and you should the sizing chart of these products for more details.)
If you are between garment 2 sizes, consider ordering both sizes, and return the one that doesn’t fit for a full credit for the product. (Please note: you will be responsible for all applicable shipping fees). You may return or exchange the second unused garment, for a prompt refund. This will save you the delay of sending back a single garment and then waiting for the exchange garment to be sent out to you. Please be aware that it is very easy to exchange for garment size, so if you do order an incorrect size, please follow the procedures below so that we can arrange an exchange. To expedite the process and save on shipping fees, many customers choose to order 2 sizes and then send back the size that doesn’t fit.
Jacket Liner Specifications: > 100% Coated Polyester Shell, 100% Polyester Lining. Imported. Glove Liner Sizing Chart - Hand Length
Reference
How to use
the chart below. Measure the length of your
open extended hand from the top of your middle finger to the bottom of your hand
near the wrist. All dimensions are in
inches.
|